Endecotts produce a range of microplate sieves made from electro-formed nickel plate in stainless steel frames of 100 mm or 200 mm diameter.
Endecotts microplate sieves feature unique self clearing apertures for the sizes from 75 to 5 microns. Microplate sieves are supplied with either round or square holes. Other sizes, sieve diameters and sieve depths can be supplied as required.
It is recommended that microplate sieves are used in conjunction with a liquid medium to assist the passage of extremely fine particles through the apertures. In certain cases where this is not possible it is often found that a compatible sieve shaker can speed up the analysis, while maintaining a high degree of accuracy.
Microplate Sieves Product Advantages
- Precision frame (ensures consistent nestability)
- Precise aperture (in accordance with ISO 3310, ASTM or other specifications)
- Natural fillet (free flowing of sample)
- Totally sealed (no crevice to lose material)
- Evenly tensioned mesh (ensures accurate analysis)
- Safe edge (big radius makes it comfortable to handle)
- Serial number (ensures full traceability)
Endecotts test sieves are certified and calibrated right from the shelf
Test sieves are inspected and calibrated in accordance with procedures listed in clause 5.1, table 1 of ISO3310-1 and ASTM E11 respectively. Each sieve is supplied with a Calibration Certificate which includes all the information given previously in the Certifcate of Compliance and more. The certificate records the number of apertures and wire diameters measured, the average aperture size and standard deviation separately for the warp and weft direction. The type of weave will also be stated. Moreover they are individually serial numbered to provide full traceability.
Re-Calibration Service
Used sieves are examined and inspected in accordance with the appropriate specification. Complying sieves are issued with a Calibration Certificate as requested by the customer.
Microplate Sieves Technical Data
| Type of mesh: | microplate |
|---|---|
| Diameter: | 100 / 200 mm 8 inches |
| Mesh sizes: | 200 µm - 5 µm |
| Frame material: | stainless steel |
| Mesh material: | electro-formed nickel plate |
| Height: | full and half height version |
Microplate Sieves Downloads
Expert Guide on Sieving
A guidance to the terminology and general information for test sieves and equipment for particle analysis
Product data sheet Microplate Sieves
Information for use: Test sieves
